Taichi Mechanism-LS2BLROD50A Laser Cut

laser cut taichi mechanism d50
Name Your Price:
Minimum Price: 5.90
Download is available until [expire_date]
  • Version
  • Download 0
  • File Size 3.24 MB
  • File Count 1
  • Create Date April 25, 2022
  • Last Updated April 25, 2022

Taichi Mechanism-LS2BLROD50A Laser Cut

Mechanical or taiji (taichi) mechanism designed for laser cutting. There are 2 leaves. When you rotate the "Drive Part"or the middle plate,
the center hole can open or close gradually. The center hole is diameter 50mm, the outer size is diameter 120mm and thickness is 12 mm. The parts' thickness are 3 mm. Because your material's thickness may be thinner or thicker than 3mm, perhaps you need to make some change accordingly when assemblying.
To assemble the parts togther, some metal parts and glue are needed:  Diameter 1mm length 5mm-pin; Diameter 1mm,length 12 mm pin; M2X12 screw; M2 hexagon nut.
What you will get are digital STEP and DXF format files,not physical parts. Before you buy the files, you can download free 3DPDF.
Video on Youtube: https://youtu.be/CA6mhUxanh0
This article shows you how to assemble the mechanism.

  3D model     Design     diy     dxf     paid     STEP