3D model

Gift Box 04-D90 For 3d printing

It is a gear structure box design plan. There are several gears and racks. When you rotate the side gear with a “key” and handle, the four blades opens or close gradually. The center hole is diameter 90mm. The whole unit can be mounted on other parts with the 4-M3 bolts. Parts are designed for …

Gift Box 04-D90 For 3d printing Read More »

retractable bracelet d70

Retractable bracelet d70-step

It is a retractable bracelet designed for 3d printing. Resin is the preferred material when printing. To assemble parts together, you may need to sand some parts or add some glue on parts,depending on the 3d prints quality. It is gear type. When you drive the “clock”, it can extend or retract. The inner hole …

Retractable bracelet d70-step Read More »

egg shape gear set

Ellipse gear set

Egg shape gear set. Parts are designed for 3d printing. Suggesting using resin material when printing. Size is 60X35mm. You need to prepare some M3X10 (or M3X8) screws by yourself.,refer to the section image in the attachment. STEP files are included in the attachment. Video: https://youtu.be/3D0zLrBWFvU

bevel gear iris mechanism

Bevel Gear Gift Box 01-STEP

It is a special box or a functional unit. When you drive the handle(or the bolt), the blades open or close gradually. It is not lightproof,and it is not a gear reduccer .  You can design the bottom box by yourself and then assemble it other parts by bolts. It can be considered a gift …

Bevel Gear Gift Box 01-STEP Read More »